Hyundai
05
tig-
160/200
The panel picture below is for reference only. If any difference with the real machine, please follow with the
real machine.
TIG Welding Description
1) Turn on the power switch at the back panel, digital current meter is normal, fan begins to wheel.
2) Open the valve of argon cylinder, adjust the volume of flow meter and make it is adequate to welding.
3) Press switch of torch, electromagnetic valve is started. Sound of HF arc striking can be heard, at the same
time argon is flowing from torch burner.
Notes
When welding is first operated, user must press
switch of torch for several seconds and begin to
weld until all of air is be drained out. When welding
is over, argon will still flow out in several seconds in
order to protect welding spot before cooling down.
So torch must be kept onto welding place for some
time before arc has been extinguished.
4) Set suitable welding current and make sure
welding current is adequate to thickness of work
piece and process demand.
5) It is 2-4 mm from welding tungsten electrode to
work piece, press control knob of torch, burn
and strike arc, sound of HF arc-striking will be
diminished. The welding machine can be operated
now.
Stick Welding Description
1) Open power switch of front panel, fan is beginning to work.
2) Make sure function switch of front panel is “down” position that is sticking. Impulse changeover switch and
knob of current down-slope time will not work. 3. Make sure welding current is adequate to thickness of
work piece.
Warning
During welding, it is forbidden to pull off any plug or cable in use, or it will lead to life-threatening danger and
severe damage to the machine.
4. Operation Control and Description
Indicator light
Power switch
Output termind -
Output terminal
Output t
Stick/TIG shift
Welding current
adjustment
Gas-electricity
output terminal
Air plug
Summary of Contents for HYTIG-160
Page 15: ......