Hyundai
08
tig-
160/200
Caution :
Before Maintenance and checking, power must be turned off, and before opening the housing,
make sure the power plug is pulled off.
1) Remove dust by dry and clean compressed air regularly, if welding machine is operating in environment
where is polluted with smoke and contaminated air, the machine needs to be cleaned everyday
2) Pressure of compressed air must be in reasonable range in order to prevent damage to small components
of machine.
3) Check internal circuit of welding machine regularly and the cable as well. Circuit is connected correctly and
connectors are connected tightly (especially insert and connect components). If scale and loose are found,
please give a good polish to them, then connect them again tightly.
4) Avoid water and steam enter into inter-machine. If they enter into machine, please dry the inside of machine
then check insulation of machine.
5) If welding machine has not operated long time, it must be put into packing box and stored in dry environment.
Correct Disposal of this product
This marking indicates that this product should not be disposed with other household wastes throughout the
EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle
it responsibly to promote the sustainable reuse of material resources. To return your used device, please use
the return and collection systems or contact the retailer where the product was purchased. They can take this
7. Maintenance
Caution
: Creep age-protecting switch. The machine is mainly used in industrial site. It will produce
radio wave, so the worker should be fully prepared for protection. should be added when using the
machine
Warning :
BEFORE CHECKING : Blind experiment and careless repair may lead to more problem of the
machine that will make formal check and repair more difficult. When the machine is electrified,
the naked parts contain life-threatening voltage. Any direct and indirect touch will cause electric
shock, and severe electric shock will lead to death.
Caution
: The machine is mainly used in industrial site. It will produce radio wave, so the worker should
be fully prepared for protection.
Summary of Contents for HYTIG-160
Page 15: ......
