background image

13

 

 

 

speed, bringing the blower back to its original low speed.

 

NOTE: 

Turbo speed has been designed to auto- shut 

off after 35 seconds, reverting the blower back to its low 
speed.

 

REMOVING AND CHARGING THE BATTERY

 

 

1. 

Press the lock button on the top center of the battery 
to slide it out of the blower.

 

2. 

Place the battery pack into the charger by sliding it into 
a locked position until it clicks

 

3. 

When the green light is flashing, the battery is 
charging. If the green light is no longer flashing, the 
battery is fully charged.

 

MAINTENANCE

 

 

WARNING: 

In order to avoid personal injury and the risk of 

fire and electric shock, remove the battery pack

 

before adjusting, inspecting, or cleaning the blower.

 

CLEANING

 

 

1. 

Brush or blow dust and debris out of the air vents 
using compressed air or a vacuum. Keep the air vents 
free of obstructions, sawdust, and wood chips. Do not 
spray, wash, or immerse the air vents in water.

 

2. 

Wipe off the housing and the plastic components using 
a moist, soft cloth. Do not use strong solvents or deter- 
gents on the plastic housing or plastic components. 
Certain household cleaners may cause damage, and 
may cause a shock hazard.

 

BATTERY

 

 

1. 

Make sure the battery is fully charged before storage 
in order to maximize the life of the battery.

 

2. 

Do not store the battery pack on the tool.

 

3. 

After charging, the battery pack may be stored in the

 

Summary of Contents for HYB60Li





















Reviews: