12
5.0
Allow the engine to idle for 20 seconds under no load.
5.1
Turn the ignition switch to the ‘STOP’ position.
5.2
The machine should now stop.
WARNING
Engine housing can become hot during operation.
DO NOT
rest or place your arm, hand or any body part against the engine housing
during operation.
WARNING
Always wear the appropriate Personal Protective Equipment (PPE) when operating
this machine.
6.0
NEVER
allow children to operate this machine.
6.1
Observe your surroundings and make sure that there is no risk of people or animals
coming in to contact with the cutting equipment.
6.2
Ensure that no-one comes closer than 15m while you are working.
6.3
NEVER
allow anyone else to use the machine without first ensuring that they have
understood the contents of the operator’s manual.
6.4
NEVER
work from a ladder, stool or any other raised position that is not fully
secured.
6.5
Keep in mind that the operator is responsible for accidents or hazards occurring to
other people or their property.
6.6
ALWAYS
ensure you have a safe and stable working position.
6.7
NEVER
leave the machine unsupervised with the motor running.
6.8
ALWAYS
use both hands to hold the machine. Hold the machine in front of your
body.
6.9
Make sure that your hands and feet do not come near the cutting attachment when
the engine is running.
6.10
When the engine is switched off, keep your hands and feet away from the cutting
attachment until it has stopped completely.
6.11
Watch out for stumps of branches that can be thrown out during cutting.
6.12
DO NOT
cut too close to the ground. Stones and other objects can be thrown out.
6. STOPPING PROCEDURE
7. USING THE MACHINE
