10
WARNING
This machine is shipped without oil and fuel.
You
MUST
ensure all fluid levels are correct before operation otherwise you may
cause serious engine damage that will not be covered by the warranty.
WARNING
ALWAYS
use a semi-synthetic 4 stroke SAE 10W30 engine oil and straight
unleaded petrol.
DO NOT
mix the fuel with the oil.
You
MUST
check the engine oil level before each use.
3.0
To add engine oil, remove the attachment from the power head and place of a flat,
level surface.
3.1
Unscrew the oil filler cap.
3.2
Slowly pour 60ml of semi-synthetic 4 stroke SAE 10W30 engine oil into the crank
case until it reaches the top of the oil fill hole.
DO NOT
overfill. Overfilling the crankcase may cause excessive smoke, oil loss and
engine damage.
3.3
Replace the oil filler cap and tighten securely.
WARNING
Petrol and its vapours are highly flammable and explosive.
To prevent serious personal injury and property damage, handle it with care.
Keep away from ignition sources and open flames, handle outdoors only in a well
ventilated area.
DO NOT
smoke and wipe up any spills immediately.
ALWAYS
shut off the engine and allow to cool
BEFORE
fueling.
NEVER
add fuel to a running or hot machine.
ALWAYS
refuel in a well ventilated area, away from buildings or sources of ignition.
Move at least 30 feet from the refuelling area before starting the machine.
NEVER
operate the machine without the fuel cap.
Failure to safely handle fuel could result in serious personal injury.
3.4
Place the machine on a flat, level surface and remove the fuel filler cap.
3. PRE OPERATION CHECKS
