Hyundai HY3810, Instruction Manual

Page: 8 / 20

· If you use a chainsaw in or after rain, particular consideration should
be given to the precautionary measures, as the soil can be very
slippery.
·
Children, other persons and animals must not be in the vicinity when
using a chainsaw. In the event of a distraction, you can lose control
of the chainsaw.
· Before sawing, make sure that there are no persons, animals or
objects in the danger zone.
·
National and / or municipal regulations may limit the time of the use
of noise-producing motor devices. Find out about this in your
municipal administration.
·
When working in a highly flammable environment (dry grass,
bushes, etc.) and during draught, have prepared fire extinguishers
due to the danger of forest fire.
Adding fuel
·
Before adding fuel mixture, you must always turn off the
engine and carefully inspect the environment so that no
sparks or open flames are in the vicinity.
·
Gasoline is very flammable. When refuelling, keep a sufficient
distance to open flames and do not smoke.
·
Before refuelling or adding oil into an appropriate tank, turn off
the engine and wait until the tool cools down. Otherwise, the
spilled fuel can ignite.
·
Only add fuel in a well-ventilated area. Collected gasoline
vapours can ignite or explode.
· Avoid contact with skin and eyes with fuel or oil. Do not inhale
gasoline vapour.
·
Make sure that gasoline or chain oil does not get into the
ground. Use a suitable base.
·
After filling, close the covers of the tanks to prevent leakage of
fuel.
Wipe up the spilled fuel and run the tool at least 3 m from the
filling site. This will prevent the exhaust fumes of the engine to
ignite the spilled gasoline.
Use
·
Never work alone! In an emergency, someone must be near.
·
Check the correct operation of the safety devices before starting
work.