![background image](http://html1.mh-extra.com/html/hyundai/hy3810/hy3810_instruction-manual_2196077012.webp)
C. Mandatory use of protective equipment for protection of the head, hearing
and eyes.
D. Mandatory use of protective gloves.
E. Mandatory use of protective safety shoes.
F. Noise level
G. Refuelling cap
H. Chain oil cap
I. Fuel pump membrane
J. Ignition handle
K. Choke handle
L. Hot surface
M. Chain brake
N. Do not use the product with just one hand. Hold the product firmly with both
hands.
O. Beware of the possibility of kickback.
Data on the nameplate
You will find a nameplate on the product that contains basic information
about the chainsaw. This label is usually located at the top or on the
product page. Data stated on the nameplate:
·
Chainsaw model
·
Oil and fuel mixture
·
Power in kilowatts (kW)
·
Weight
·
Engine volume
·
Year of manufacture
·
Engine type
·
Batch number
·
Engine speed when loaded
Installing the guide bar and chain
WARNING! Wear protective gloves when installing.
1. Push the guard towards the chain to release the chain brake. (1)
2. Unscrew the screws and remove the unit cover. (14)
3. Install the toothed support on the motor unit. (15)
4. Insert the bar with the guide on the motor pin. (A1)
5. Place the chain first around the drive unit and then around the bar
to fit properly to the toothed wheels.
NOTE: Pay attention to the direction of the chain. (A2)
6. Install the tensioner nut on the unit cover, then install the cover on
the device. Tighten the screw with your hand.
NOTE: When installing the unit cover, the lid must first be installed on
Summary of Contents for HY3810
Page 1: ...CHAIN SAW HY3810 HY4110 Instruction Manual...
Page 2: ......
Page 3: ......
Page 20: ......