background image

Instruction manual                                                                               

· 

This instruction manual applies for this device. It contains important 
information for starting the use and handling with the product. 

· 

Before  you  start  using  the  device,  read  the  instruction  manual 
carefully and in its entirety, specially the safety instructions. Failure 
to follow this instruction manual can result in serious bodily injuries 
or damage to the device. 

· 

The  instruction manual  is  based  on  the standards and regulations 
valid in the European Union. 

· 

When abroad, you should also comply with the regulations and laws 
of the individual country. 

· 

Save the instruction manual for later use. If you give the device to a 
third person, also hand him or her the instruction manual. 

 

Explanation of symbols                                                                       

The  following  symbols  and  warning  words  are  used  in  the  instruction 
manual: 

WARNING! 

This  warning  symbol/word  marks  danger,  which  can,  if  not 
avoided,  can  result  in  material  damage,  death  or  serious 
injuries. 

NOTE! 

The symbol gives additional useful information about the use of 
the device.

 

 

 

 

WARNING!

                                                                                   

 

 

 

· 

The  manufacturer  shall  not  be  held  liable  for  any  damage 
arising from incorrect use of the device, incorrect maintenance 
and  interventions  regarding  the  device  with  the  purpose  to 
replace  or  modify  its  parts.  Only  service  authorised  by  the 
manufacturer is allowed to perform works on the device. 

· 

Do  not  overload  the  tool.  Overloading  and  repeated  engine 
blocking  can  damage  the  tool,  and  consequently  reduce  the 
lifetime of the product. 

· 

The  tool  is  not  intended  to  work  in  a  potentially  explosive 
atmosphere! 

 

 

 

Summary of Contents for HY3810





















Reviews: