background image

2.2.

 

Safety. 

2.2.1.

 

 Never touch moving parts. 

2.2.1.1.

 

Never place your hands, fingers or other body parts near the 

compressor’s moving parts. 

2.2.2.

 

 Never operate without all guards in place. 

2.2.2.1.

 

Never operate this compressor without all guards or safety features in 

place and in proper working order. If maintenance or servicing requires 
the removal of a guard or safety features, be sure to replace the guards or 
safety feature before resuming operation of the compressor. 

2.2.3.

 

 Always wear eye protection. 

2.2.3.1.

 

Always wear safety goggles or equivalent eye protection. Compressed 

air must never be aimed at anyone or any part of the body. 

2.2.4.

 

 Protect yourself against electric shock. 

2.2.4.1.

 

Prevent body contact with grounded surfaces such as pipes, radiators, 

ranges and refrigeration enclosures. Never operate the compressor in 
damp or wet locations. 

2.2.5.

 

Disconnect the compressor. 

2.2.5.1.

 

Always disconnect the compressor from the power source and 

remove the compressed air from the air tank before servicing, inspecting, 
maintaining, cleaning, replacing or checking any parts. 

2.2.6.

 

Avoid unintentional starting. 

2.2.6.1.

 

DO NOT carry the compressor while it is connected to its power 

source or when the air tank is filled with compressed air. Be sure the knob 
of the pressure switch in the “off” position before connecting the 
compressor to its power source. 

2.2.7.

 

 Store compressor properly. 

2.2.7.1.

 

When not in use, the compressor should be stored in dry place. Keep 

out of reach of children. Lock-out the storage 

area. 2.2.8.

 

 Keep work 

the 

area clean. 

2.2.8.1.

 

Cluttered areas invite injuries. Clear all work areas of unnecessary 

tools, debris, furniture et 

2.2.8.2.

 

Keep children away. 

2.2.8.3.

 

DO NOT let visitors contact compressor extension cable. All visitors 

should be kept safely away from work area. 

2.2.9.

 

 Dress properly. 

2.2.9.1.

 

DO NOT wear loose clothing or jewelry. They can be caught in moving 

parts. Wear protective hair covering to contain long hair. 

2.2.10.

 

Don’t abuse power cable. 

2.2.10.1.

 

Never yank it to disconnect from receptacle. Keep power cable from 

heat, oil and sharp edges. 

2.2.11.

 

Maintain compressor with care. 

2.2.11.1.

 

Follow instructions for lubricating. Inspect cable periodically and if 

damaged, have repaired by authorized service facility. 

2.2.11.2.

 

Inspect extension cables periodically and replace if damaged. 

Page 6

Original

Summary of Contents for HY3200S





















Reviews: