background image

1. SAFETY

1.1.

 

General safety notes.

1.1.1.

 

 The operator of the machine is responsible for, and has a duty of care in 

making sure that the machine is operated safely and in accordance with the 
instructions in this user manual. Keep the manual safe and pass it on if the 
machine 

is 

loaned/sold to another user. 

1.1.2.

 

 Please note the following safety points. 

1.1.2.1.

 

The machine should never be left it in a condition which would allow 

an untrained or unauthorised person/s to operate this machine. 

1.1.2.2.

 

All due care and diligence should be taken by the operator for the 

safety of and with regard to those around whilst using the machine. 

1.1.2.3.

 

Some or all of the following - warning signs, symbols and/or PPE 

pictograms may appear throughout this manual. You MUST adhere to 
their warning/s. Failure to do so may result in personal injury to yourself 
or those around you. 

The FOLLOWING safety notes will help avoid or reduce risk of injury or death. 

Indicates a hazard, which, if 

not avoided, could result in 

serious injury or death. 

Indicates a hazard, which, if 

not avoided, could result in 

serious injury. 

Indicates a hazard which, if 

not avoided, might result in 

minor or moderate injury. 

Indicates a situation that 

could easily result in 

equipment damage. 

READ & Keep the manual 

safe and pass it on if the 

machine 

is 

loaned/sold 

to another user. 

You MUST fully read 

instructions to make sure 

you use and operate 

machine safely 

Appropriate Personal Protective Equipment (PPE) 

MUST be worn at all times when machine is in use or being repaired. 

ALWAYS keep the working area clear of non-essential people to 

include  but not limited to children, the elderly and vulnerable 

persons. 

NEVER ALLOW an untrained person to use this machine. 

Page 4

Original

Summary of Contents for HY3200S





















Reviews: