Hyundai HWC-M100, User Manual

Page: 17 / 42

RF Data Modem HWC-M100 / HWC-W100 / HWC-W120
15
- NET-ID : Network Number. Each network has its own unique frequency band.
and you can select one of the 16 network.(Net.ID : 0~15)
- DEVICE-ID : Device-ID of the EP. Each EP has its own unique number in a network.
and you can select one of the 100 EPs.(Device-ID : 0~99)
- BAUDRATE : Baud-rate of interface between EP and End Device(4800~38400Bps)
- DATA BIT : Length of Data-bit(7 or 8 bits)
- STOP BIT : Length of Stop-bit(1 or 2 bits)
- PARITY BIT : Selection of use of parity-bit(even or none)
- INTERFACE : Type of Interface between EP and End-Device.(RS232/RS485/RS422)
- AP/EP Mode : You must turn the dip-switch for AP/EP-mode to OFF.
NET ID 0 ~ 15 Selection of Network(RF-band)
DEVICE ID
00 ~ 19(AP)
00 ~ 99(EP)
Unique AP/EP ID in a network
MODE SELECT
Baudrate
00 : 4800bps
01 : 9600bps
10 : 19200bps
11 : 38400bps
Baud-Rate for communication with
End-Device.
Data Bit Length
0 : 7Bits
1 : 8Bits
Length of Data Bit
Stop Bit Length
0 : 1Bit
1 : 2Bits
Length of Stop Bit
Parity Bit
0 : Even
1 : None
Use of Parity Bit
Interface
00 : RS232
01 : RS485
10 : RS422
Selection of interface
AP/EP Select
0 : EP
1 : AP
Selection of RF-Modem Mode