4
Turn off the tool after use, when you leave it unattended, when changing these accessories and before
servicing.
Keep handles dry, clean and free of oil and grease.
Be concentrated when using the tool. Look at what you do, use good sense and do not use the tool
when you are tired.
Remove the blade guard before using the tool.
A damaged guard or other part must be properly repaired or replaced by an authorized service center,
unless otherwise specified in this instruction manual.
Do not use the tool if the starter is not working (if it cannot be turned ON and OFF).
Place the equipment in a well-lit area, on a flat, stable, dry and well-ventilated surface, away from
flammable products and with plenty of space for the evacuation of sparks and sharpening waste.
Immediately stop the tool in the event of a malfunction of the motor or in case of unusual noise.
Do not use the tool if the starter is damaged.
Do not move the chain with your hand with the wheel moving.
Do not stop the chain with your hands or other objects.
Treat the chain teeth with caution during operation; they can cause severe cuts.
When not in use, the machine must be stored in a dry, locked place out of the reach of children.
Before using the product and after any shock, please check it for signs of wear or damage. Please carry
out repairs if necessary.
Always switch off the machine:
o
Every time you leave the device unattended;
o
Before releasing an obstruction;
o
Before checking, cleaning or working on the product;
o
After hitting a foreign object;
o
Every time the product starts to vibrate abnormally.
Pay attention to foot and cutting injuries.
Inspect and regularly service the product. Repairs should be carried out only by an authorized service
center or a similar qualified specialist.
When not in use, the machine must be stored in a locked dry place, out of the reach of children.
When transporting the tool, always add the blade guard to the blade. Always carry the tool by holding
the handle, never the blade.
Do not use the product on a slippery surface.
Do not use the product on steep, slippery slopes.
When planning your work schedule, allow enough time for rest. Limit continuous use of the device, eg
use 30 ~ 40 minutes per session, and take 10 ~ 20 minutes of rest between work sessions. Work a
maximum of two hours per day.
If the machine has struck foreign objects, check if the tool is damaged and bring it to repair if necessary.
Do not place any part of the body on the chain when the chainsaw is operating. Before starting the
chain saw, make sure that the chain is not in contact with anything. A moment of inattention during
use may cause your clothing or body part to stick to the chain.
Always hold the chainsaw back handle with your right hand and the front handle with your left hand.
Hold the chainsaw by inverting your hands increases the risk of personal injury and should never be
used.
For the chainsaw designed with the chain guide on the left side, the reference to the "right hand" and
"left hand" positions is reversed.
When cutting a branch that is under stress, pay attention to the risk of elastic return. When the tension
of the wood fibres is released, the spring-loaded limb may strike the operator and / or project the chain
saw out of control.
Follow the instructions for lubrication, tension and chain change accessories. A chain whose tension
and lubrication are incorrect can either break or increase the risk of rebound.
Keep handles dry, clean and free of oil and grease. Oily, greasy grips are slippery and cause loss of
Summary of Contents for HTRT65-2C
Page 1: ...1 HTRT65 2C ...
Page 25: ...25 ...
