17
b.
Trunk in elevation
Begin by cutting a first part from below and then from above. Then, on the second part, repeat this
operation.
c.
Pruning of a felled tree
Observe first the direction of flexion of the branch. Make a first notch on the side in flexion and
finish the cut on the opposite side.
d.
Pruning a tree
Begin pruning by nicking the tree from below and then finish at the top.
MAINTENANCE AND STORAGE
MAINTENANCE
Before any maintenance work, the machine must be switched off and completely cooled.
Perform the maintenance work according to the instructions below and perform them regularly. A
clean, well-maintained machine increases its standard of living and efficiency. On the contrary, a
machine maintained can cause damage, accidents and render the tool inoperable in the short term.
Any other maintenance, modification or repair work must be carried out by a qualified professional.
Do not immerse the tool in water or any other liquid.
a.
A
fter each use
-
Clean the engine block louvers with a blower.
-
Check the chain brake if it is working properly.
-
Clean the plastic parts before wiping with a damp cloth.
-
Check the use of the chain guide
-
Check the auto lubrication circuit if it is obstructed or not.
-
Check sprocket condition
-
Clean the cylinder fins with a compressor
Summary of Contents for HTRT65-2C
Page 1: ...1 HTRT65 2C ...
Page 25: ...25 ...