55
Trouble Shooting
Trouble Shooting
There may be various reasons for the abnormal operation of the unit. Therefore, if the unit does not
work properly, check it according to the procedures shown in the table below :
Remedy
Connect power cord properly into
the power socket.
Connect terminals correctly with
scart cable or RCA or RF cable.
Connect the antenna cable
correctly.
Adjust the direction of antenna.
Check the cable connections,
LNB and other equipment
connected between the LNB and
the receiver or adjust the antenna.
Type the setting value correctly.
Use TV of same mode.
Use the NTSC/PAL converter
connected to the receiver and TV.
Change the batteries.
Switch off the light.
Aim the remote control at the
receiver.
Black screen in scramble channel
The CAM is not working correctly
Eject the CAM and insert in again.
Possible causes
AC power cord disconnected.
Wrong connection of the
video/audio output to TV input
terminal.
Wrong connection of satellite
antenna cable.
Wrong direction of satellite
antenna.
No signal or weak signal.
Wrong setting of channel
information in MENU screen.
Your TV mode is different from
satellite broadcasting mode.
Battery exhausted.
Fluorescent light interfering
with the remote controller
Remote controller is
incorrectly aimed.
Problem
LED on front panel
does not light.
No Picture or sound.
Black-and-white
screen or V-Hold.
The remote
controller is not
working.
Summary of Contents for HSS-880HCI
Page 58: ......
