Hyundai HSS-880HCI, User Manual

Page: 33 / 58

33
Operation
Operation
1. TP Edit / Scan
After ‘LNB Configuration’ and ‘Antenna Setup’ procedure, when necessary, you can edit and/or add
certain TP s (transponders)
Press MENU key.
Select ‘Installation’ with or , and press .
Select ‘TP Edit/Scan’ with or , and press .
CH
CH
CH
CH
Select the ‘Satellite Name’ which includes the TP you want to add/edit with or .
Move to ‘TP Frequency’ with and select the TP you want to edit with or .
If you want to add the new TP, enter the TP frequency with numeric keys.
Select
‘Polarization’ by pressing and the set the proper value for selected TP with or .
Select ‘Symbol rate’ by pressing and enter the symbol rate value for the selected TP with
numeric keys .
After entering all values of the
TP parameters, move to ‘SCAN’ section (column) with and press
for storing all the entered TP data.
As a result, you can get the following menu showing the scanning process.
CH
CH
VOL VOL
CH
VOL VOL
CH
VOL VOL
TP Edit/Scan
-Select, -Prev. -Main,
AsiaSat 2
[24] 4,000 GHz
Horizontal-18V
28,123 MSPS
Free+Scrambled
Good
81%
Satellite Name
TP Frequency
Polarization
Symbol Rate
Scan
TP Delete
6.4 Transponder
TP Edit/Scan
-Select, -Prev. -Main,
USER
[15] 3,820 GHz
Vertical-14V
28,123 MSPS
Free+Scrambled
Good
81%
Satellite Name
TP Frequency
Polarization
Symbol Rate
Scan
TP Delete
Scanning
Press to stop scanning
Q