Hyundai HSS-880HCI, User Manual

Page: 16 / 58

16
Operation
Operation
6.1 Getting Started
Level Indicating selected satellite signal strength level
Quality Indicating signal to noise ratio
Select the satellite you want with or .
Press to move to TP section and select the TP you want with or .
When the satellite and the TP are selected, you can check the reception status of the satellite signal.
If the reception signal status is bad, adjust antenna to get the following result.
VOL VOL
CH
VOL VOL
Tuner Lock FEC 1/2, 2/3, 3/4, 5/6 or 7/8
Level over 30% Quality over 10%
If you press , DiSEqc Motor will move toward Zero Equator.
- Move / Save
Motor moves to West & East direction.
- Set Limit
Determine the value of Limit of Motor.
If you select , the value of Limit will be changed.
- My longitude / My latitude
You can use this item when STAB is setted on ‘Motor/Goto 0'.
Determine your longitude & latitude at present.
‘East/West' is changed by using or .
VOL VOL
DiSEqC 1.2 Positioner Setting
- Motor / Goto 0
Determine the kind of Motor & whether or not controlling it by using or .
VOL VOL
On Using DiSEqC Motor.
Off Not using DiSEqC Motor.
STAB
Using the specific Motor supplied by Stab company. Determine the longitude of the
satellite on LNB Configuration Menu. If the longitude of the satellite on LNB Configuration
Menu is setted, user must input the longitude about your position at present.