Hyundai HSS-880HCI, User Manual

Page: 15 / 58

15
Operation
Operation
6.1 Getting Started
Select item you want to edit with or and change each parameter.
- Position : You can input the longitude of the satellite with numeric keys.
- High L.O. / Low L.O. : Enter LNB oscillator frequency with numeric keys.
- Power : Set LNB power ON or OFF with or .
- 0/22KHz :
Set the path of 0/22KHz switch box with or .
- DiseqC : Set the path of DiSEqC box with or .
- Tuner Select : Set the tuner #1, #2, #1 & #2 and Loop with or .
If you do not use the switch box, set as “---”.
Note : When you change each parameter, you need to know exact parameter of LNB to modify
L.O.(local oscillator) frequency.
Note : When you change each parameter, you need to understand environment of connecting the
receiver and antenna in order for you to set 22KHz and DiSEqC properly.
Note : For more information, refer to Chapter.6 How to Connect
When necessary, you can change a
satellite name
as you wish.
You can enter alphabetic characters with the numeric keys.
For example, if you want to enter
‘SAT-1'
,
Press .
Note : Press for space.
After the installation procedure, press EXIT key or MENU key to store your entered data.
VOL VOL VOL VOL
VOL VOL
VOL VOL
VOL VOL
VOL VOL
CH
CH
If you press , the selected Satellite will be added and the cursor will move to right window for
detailed installation.
Note : If you just want to edit the data of the satellite which is already contained in the receiver, press
after you select the satellite.
4. Antenna Setup
You need to position your antenna correctly for reception of the best signal.
Press MENU key.
Select ‘Installation’ with or , and press .
Select ‘Antenna Setup’ with or and press .
CH
CH
CH
CH
Antenna Setup
-Prev. -Main,
Motor / Goto 0
Move / Save
Set Limit
My longitudo
My latitudo
Off
Stop
Disable
000.0
00.0
O
O
O
ASIA3
[7] 3,710 GHz
Vertical - 14V
3,300 MSPS
Tuner Lock
FEC
Level
47% 51%
Qual.
3/4