To remove particularly stubborn soiling, it may be necessary to use a brush in
combination of the detergent and a high pressure rinse.
The following cleaning procedure will help you to better organize your cleaning work and
to obtain an optimal result in a minimum of time:
-
Before starting, prepare the surface to be cleaned; Remove furniture from the work
area and ensure windows and doors are properly closed. Protect or remove any
hazardous materials or objects that may be damaged.
-
Then spray the surface to be cleaned with the pressurized water jet to remove dirt
from the surface.
-
Start the final rinse from the bottom of the surface by moving upward. Be sure to rinse
the surface thoroughly so that no traces of detergent remain.
5.
CARE AND MAINTENANCE
The cleaner must be switched off and unplugged before cleaning, maintenance and
replacement of parts. Maintain this machine regularly in accordance with these
instructions to keep the machine in working order and extend its life.
Always check the high pressure hose and connectors regularly to make sure no damage
or problems as they are important parts for the machine. Do not use if damaged.
After each use, perform the following actions:
x
Inspect the tip to make sure it is not blocked by dirt. If necessary, clean the nozzle
and rinse with cold water.
x
Remove the water inlet filter and check that it is not obstructed. If it is dirty, clean it
and rinse it. When you remove the filter, always replace it after cleaning.
x
Wash hoses, connectors and accessories.
x
Clean the detergent sprayer and the jets each time.
x
Check that the air vents are not obstructed. Clean these vents if they are dirty.
Other maintenance:
x
Regularly lubricate the connections so that the joints do not dry.
x
Take your machine to a qualified technical service once or twice for a general
inspection of your machine.
NOTE: If repairs are required, they must be carried out only by personnel belonging to an
approved technical center or by qualified technicians.
6.
STORAGE
Carry out cleaning and remove hoses and accessories before storing. Check that there is no
more water in the pipes.
Store the machine, hoses and accessories together in a dry, dry place away from moisture
and frost.
The machine must be stored away from children.
You can install accessories (multiple jet, turbo nozzle and detergent jet) behind the machine.
14
Summary of Contents for HNHP2580SP
