triggering the gun, adjust the nozzle to a
wide fan pattern and slowly adjust to the
desired spray pattern. This will help you
avoid applying too much concentrated
spray to the surface which could cause
damage.
3. Final Rinse
Start final rinse at bottom a work upward.
Make sure you thoroughly rinse the surface
and that all detergent has been removed.
4. Shut down
1. Be sure all detergent is flushed from
system.
2. Turn off motor.
3. Turn off water supply.
4. After motor and water supply are turned
off, trigger gun to depressurize system.
CAUTION:
NEVER
turn water supply off
before turning motor off. Serious damage
could occur to the pump andlor motor.
WARNING!
NEVER disconnect high
pressure discharge hose from machine
while system is pressurized. To
depressurize, turn motor off, turn water
supply off and squeeze gun trigger 2-3
times.
5. After each use, wipe all surfaces of the
pressure washer with a clean, damp cloth.
5. Storage
Do not store pressure washer outdoors.
Do not store pressure washer where it
might freeze.
TIPS FOR EXTENDING THE LIFE
OF YOUR PRESSURE WASHER
1. Never operate unit without water.
2. Pressure washer is not supposed to
pump hot water. Never connect to hot water
supply – this will significantly reduce life of
the pump.
3. Using detergent other than others brand
may cause damage to pump components
(o-rings, etc.).This also applies to chemicals
such as bleach, dish soap, etc.
4. Never operate unit for more than one (1)
minute without spraying water. Resulted
heat buildup will damage pump.
5. Before adjusting nozzle’s pressure
(high-to-low or low-to-high) release trigger.
Failure to do so will reduce life of o-rings in
lance.
50