![background image](http://html.mh-extra.com/html/hyundai/hnhp2250r-ac165b/hnhp2250r-ac165b_original-instruction-manual_2197171046.webp)
INSTALLATION, ELECTRICAL
AND WATER CONNECTIONS
1. pressure cleaner 2. water supply hose
3. water connection 4. water inlet
5. high pressure tube 6. water outlet
7. spray gun
8. power supply
* No. 2, 3, 8 are not included.
Pre-operation
ADJUSTING FAN PATTERN
The angle of spray coming out of the lance
may be adjusted on some lances by rotating
the nozzle. This will vary the spray pattern
from approximately a 0° narrow high impact
stream to a 60° wide fan spray.
(See Figure2)
A narrow stream has high impact force on
the cleaning surface and results in
maximum deep cleaning in a concentrated
area. However, this narrow high impact
spray must be used cautiously, as it may
damage some surfaces.
Connection
1. Attach the high pressure hose to the
pressure water outlet of the machine.
2. Attach the spray handle to the high
pressure hose. Prior to operating the
machine please ensure that the high
pressure hose has been completely
uncoiled. Whilst the machine is in operation
the hose MUST not loop.
3. Mount the nozzle or any other equipment
you want to use.
4. Connect the machine to the water and
power supplies.
45