10
3. INSTALLATION
1) Wheels
- Put upside down the tool.
- Add the axis on the support
- On each side add a washer, a wheel, a washer and a pin to lock the wheel in place.
2) Foot pad
- Keep the tool upside down.
- In the food pad (2 pieces), put a washer and a screw on each foot pad
- Localise the two holes on the bar. Screw each foot bar in each hole
3) Handles
- Put the tool in the normal position.
- On each side, localise two holes. It is the place where install the handles.
- Install the handles and then fix them fix the screw and nut.
Summary of Contents for HG4000-A
Page 8: ...8 Warnings on product Read them carefully before use the tool...
Page 26: ...26 11 CIRCUIT DIAGRAM...
Page 32: ...29...