![background image](http://html1.mh-extra.com/html/hyundai/hdfn25f/hdfn25f_operation-and-maintenance-manual_2195657030.webp)
30
7. Simulation launching system
No. Operation
Guide
Schematic
Diagram
1
Disconnect the davit hook from
suspension eye and connect it to
the ring for the sliding rope.
Note.
Weight load should not act on the
sliding rope.(only for safety)
<Activity on the ship>
2
Unravel the turn buckle until the
holding pin comes loose for
weight load not to act on it.
(Now, weight load acts on the
boathook ring only.)
.
3
Check the simulation launching
system by operating the sst ass’y
after removing the safety pin 1 &
2 .
<Activity on the ship>
Note.
If launching system is working
correctly, the boat will show free
fall status (short distance).
Weight load will act on the turn
buckle again.
Summary of Contents for HDFN25F
