Hyundai HDFN25F, Operation And Maintenance Manual

Page: 21 / 102

21
Table 6.2.1.1 - Inspection procedure and maintenance plan for boat
Items Method Inspection procedure
Mainten-
ance
Plan
W M Y
Outside hull Visual
Inspect for deformation or oth-
er defects. Inspect for peeling
or any damage of re-
tro-reflective material.
X X
Outside canopy Visual
Inspect for deformation or oth-
er defects.
X X X
Buoyant lifeline Visual Inspect for any damage. X X
Inside boat
GRP Visual
Inspect for deformation or oth-
er defects.
X X X
Wood Visual Inspect for crack or rot. X X X
Metal Visual Inspect for corrosion. X X X
Drain valve Visual Inspect for any damage. X X X
Release device Visual
Check resetting condition.
Remove any dirt on moving
parts.
X X X
Painter release device Visual
Check resetting condition.
Remove any dirt on moving
parts.
X X X
All hatches
Visual
Operation
Inspect for easy operation and
good condition of gasket.
X X
Window Visual
Inspect for any crack on glass.
Clean both sides of glass.
X X
Steering gear
Visual
Inspect for any damage of
rudder, tiller and emergency
tiller.
X X X
Operation
Inspect for good operation of
main steering and connecting
emergency tiller.
X X X
Stern tube Visual
Inspect gasket and check for
leakage of seawater. *2 *2 *2
Propeller and guard Visual Inspect for any damage. X X X
Breather valve Operation Inspect operation of valve. X X
Water
spray sys-
tem
(only tank-
er version)
Clutch
V-belt
Visual
Inspect for proper tension of
V-belt. Inspect for any damage
of belt.
X X
Operation Inspect for proper operation. X X
Spray pipe Visual
Inspect for corrosion or any
damage.
X X X
Spray noz-
zle
Visual Remove any deposit. X X X