background image

28

Warranty

Midland International U.S.A. 

Hyundai Power Equipment Distribution

P.O. Box 1408 

Columbia, MO 65203

This warranty is limited to the listed Hyundai Power Equipment products when distributed by

Cobalt Power Inc.

These products are warranted to be free of defects in materials and workmanship from the original date of 

purchase according to the schedules defined in this warranty document. This limited warranty guarantees 

that any defective parts will be repaired or replaced, at the warrantor’s discretion, at no cost, including 

diagnosis and replacement parts.

3 YEAR LIMITED WARRANTY:

The limited warranty coverage is continual from the initial date of purchase and does not restart at any 

time under any circumstances. This limited warranty is valid only when the equipment receives all neces-

sary preventative maintenance, as described in the Hyundai User Manual. The repair or replacement will 

take place within a reasonable period of time during normal business hours.

LABOR WARRANTY CLAIM PROCEDURE:

The product must be purchased in the United States or Canada from Cobalt Power Inc., via an authorized 

channel of distribution. This limited warranty applies to the first purchaser and each subsequent regis-

tered owner during the applicable warranty time period.

What MIDLAND INTERNATIONAL INC. will Repair or Replace Under Limited Warranty:

MIDLAND INTERNATIONAL INC. will repair or replace, at its opinion, any part that is proven to be 

defective in material or workmanship under the normal use during the applicable warranty time period. 

Warranty repairs and replacements will be made without charge for parts, accessories, or labor during 

the first 12 months after original purchase. The remaining 24 months of warranty are parts only. Anything 

replaced under warranty becomes the property of MIDLAND INTERNATIONAL INC. All parts replaced 

under warranty will be considered as part of the original product, and any warranty on those parts will 

expire coincident with the original product warranty.

Warranty service must be performed by a Hyundai-authorized service dealer. If you feel your equipment is 

malfunctioning due to a defect, simply contact our customer support center for technical advice, to file a 

warranty claim or for general information.

Summary of Contents for HCP652




































Reviews: