26
6.0 - TROUBLESHOOTING
Common issues can be fixed by following the instructions in this guide. If the unit will not function after
following these instructions, contact technical support before attempting to use or repair the product.
ISSUE
CAUSE
ACTION
Engine will not
start
Faulty spark plug
Use a wrench to remove the spark
plug and follow procedure for
cleaning or replacing
Clogged fuel line
Check fuel line for leaks. Unclog if
necessary
Wrong fuel type
Drain fuel and clean fuel line. Refill
with appropriate fuel
Carburator not getting air or fuel
Take to service dealer
Dirty air filter
Clean air filter
Starter not functioning
Take to service dealer
Power is low
Dirty air filter
Clean air filter
Throttle lever unadjusted
Slide throttle lever to increase
power output
Water output
is low
Clogged strainer
Remove debris and rinse with water
Suction hose blocked with debris
Remove obstruction
Damaged hoses
Replace hoses
Clogged impeller
Remove obstruction
Lose hose clamps
Tighten or replace hose clamps
Leaking seals
Take to service dealer
No water
output
Incorrect pump placement
Reposition pump (see placement
section of manual)
Pump is not primed
Prime pump
Pump mechanism is damaged
Take to service dealer
Summary of Contents for HCP652
