![background image](http://html.mh-extra.com/html/hyundai/hc-802/hc-802_instruction-manual_2196465024.webp)
25
24 / 31
Trimming moustache
1. Before trimming moustache, wet it a bit and comb it.
2. For reaching even cut of the moustache, cut the ends carefully through a comb.
If you prefer using a finger as the guide, follow the procedure on figure 2B.
IV. MAINTENANCE
Turn off the appliance before each maintenance, unplug the power cord from the
power supply! Do not use rough and aggressive detergents!
Wipe the trimmer surface
with a wet soft cloth.
Cleaning blades
Clean the blades with an enclosed brush.In order to keep the trimmer in a perfect condition,
you have to lubricate the list with blades using one or two drops of oil for sewing machines.
Do not use hair oil, petroleum jelly or oil mixed with petrol or any other solvent because after
evaporation the solid parts of the lubricant could slow down operation of the blades. Insert
the trimming head to the trimmer properly, turn on the trimmer and then turn it off and wipe
out the excessive oil from the blades.
Storage
Put the trimmer with the accessories back to the original package at a dry and dust free
place, out of reach of children and incapacitated people.
V. TECHNICAL SPECIfICATIONS
• Sharp stainless steel cutting edge
• Adjustable cut lengthwithout extensions
2 - 5 mm
• 4 replaceable extensions (3 - 6 - 9 - 13
mm)
• Very safe handling
• Just corded use
• The package includes a cleaning brush,
comb and oil for edge oiling
• ON / OFF switch
• Hanging loop
• Power cord length 1,8 m
• Acoustic noise level of 72 db (A)
• Input 8 W
• Size: 6 x 24 x 4 cm
• Weight: 0,3 kg
• Input in off mode is 0.00 W
VI. LEGISLATIVE & ECOLOGy
The product has received ES declaration of conformity according to Act as amended.
The product matches the requirements of the below statutory order as amended.
– Committee Regulation No. 2006/95/ES as amended, setting the technical requirements of
the electrical appliance as low.
– Committee Regulation No. 2004/108/ES as amended, setting the technical requirements
of products in terms of their electromagnetic compatibility.
The manufacturer reserves the right to make insignificant changes to the standard
design that do not affect the function.