EN - 21
EN
• If the dryer was stored at lower temperatures, acclimatize it first, by which you remove stiff
-
ness of the lubricating fat in bearings and mechanical resistance of the plastic parts will be
maintained.
• Also, do not put the trimmer in the on position on soft surfaces (e. g. bed, towels, sheets, car
-
pet); the surfaces or the appliance could get damaged.
• The power cord of the adapter must not be damaged with sharp or hot objects, open fire and
it must not be sunk into water.
• If you need to use the extension cord, it has to be uncorrupted and it has to comply with the
valid standards.
• The adaptor supplied with this appliance is intended for this appliance only, do not use it for
other purposes. Also, use only the supplied adaptor with this appliance, do not use any other
adaptor for charging (e.g. from another appliance).
• During normal operation, the accumulator batteries are not taken out. Take out the batteries
only if the appliance is to be disposed.
• Never use the appliance for any other purpose than for the intended purpose described in
these instructions for use!
• The producer is not responsible for any loss caused by improper handling of the appliance
and its accessories (e. g. injury, appliance damage, fire, etc.) and its guarantee for the appli
-
ance does not apply in the case of non-compliance with the safety instructions above.
• Oil: Warning, Avoid contact with eyes, Do not drink, Keep away from children.
•
Do not use the appliance close to bath tubs, showers, bash basins or other water con
-
tainers.
DESCRIPTION OF THE CONTROLS
1) 2 cutting guide for 22 lenghths(from 3-18mm and from 21 to 36mm,in 1.5mm steps)
2) 1 precision guide (0.5-2.5mm)
3) blades:
moving blade:
- sharpened process: for an exceptional cutting edge.
- long lasting:ultra hard-wearing and 100% stainless steel blade.
Faxed blade:
For longer life:
Combining these technologies perfects the condition of the blade surface,thereby
reducing their friction coefficient .
4) thinning system
5) thinning system button
6) adjust length wheel
7) ON/OFF button
8) charging indicator light
9) charging stand
10) cleaning brush
11) charging transformer
12) comb
13) Lock system