Hyundai H-VCRQ90, Manual

Page: 10 / 32

10.
Press the button when the device is on pause mode, enter to the cleaning start time
setting. Set the time using buttons for cleaning start time .
Edge cleaning button
Press the button to start edges cleaning.

This function is not available for the H-VCRQ90 model.
Mopping cloth use

Mopping cloth for wet floor cleaning is in a kit.

Attach wet mopping cloth with help of Velcro to device bottom

Follow all above described steps to turn on the device.
UV-lamp

UV-lamp for destroying pathogenic bacteria during cleaning is on the back of the
device.

NOTICE: If the UV-lamp is broken, turn off the device. Do not use the device with a
broken UV-lamp. Do not use a vacuum cleaner to clean the UV-lamp fragments. Put the
fragments in a plastic bag and dispose of them in accordance with the instructions of
the local authority. To replace the UV-lamp, contact an service center.
Disposal of the UV- lamp

Consult with your local authority for proper disposal and recycling of old UV-lamps.

UV-lamp contains mercury. Do not throw the lamps in the usual trash. Parts containing
mercury must be disposed of in accordance with the instructions of the local authority.
Cleaning and maintenance
ATTENTION!

The device must be disconnected to the mains and completely switched off for cleaning
and maintenance

Wipe the body with wet cloth if it is necessary.

Only the dust bin may be rinsed out. The device itself, the filters or the remote control
may not be immersed into the water or to other liquids. Make sure that all parts are
completely dry before you place the dust bin back to the device!

None of the parts of the robotic vacuum cleaner are suitable for cleaning in the
washing machine or dishwasher!

Do not use any corrosive or abrasive cleaners for the device cleaning. They can damage
the body’s surface.

Cleaning the side brushes

The debris or hair should be removed. It is highly recommended to clean the brushes
after 4-5 cleanings.
Dust container cleaning

Press dust container release button to separate is from body.

Open the container and empty it to the dust bin

Place the dust container back.
Do not in any case open the rechargeable battery pack!