5
Connection
Video/audio system connection
Before you start connection of external
devices, ensure that power of the unit is
switched off.
Following outputs are available in this unit.
Composite video
Use the cable with yellow plug of an AV
cable to connect the composite video output of
this unit to the video input of a TV/monitor.
SCART
Use a 21-pin SCART cable to connect the
SCART output of this unit to the TV/monitor
SCART input.
Component video
Use a 3-core AV cable to connect the
component outputs of this unit to the
corresponding inputs of a TV/monitor.
S-video
Use an S-Video cable to connect the
S-Video output of this unit to the S-Video input
of a TV/monitor.
5.1CH audio
Use 3 pairs of audio cables to connect the
5.1 CH audio outputs of this unit to the 5.1
channel inputs of external audio amplifiers or
other players.
Stereo audio
Use a pair of audio cable (white for left, red
for right) to connect the stereo audio outputs of
this unit to the stereo inputs of a TV or a power
amplifier.
Coaxial digital audio
Use a special coaxial cable to connect the
coaxial output of this unit to the coaxial input of
an external device (e.g. amplifier with in-built
DTS-decoder).
• The connection you should make
depends on the TV/monitor input terminals.
Don’t make all the connections at the same time;
otherwise the produced picture will be affected.
• The physical connection should accord to
the audio/video output setup of this unit.
Downloaded From DvDPlayer-Manual.com Hyundai Manuals
