4
Instruction manual
received.
• To receive a weak broadcast signal press
NEXT/TUNE UP (NEXT/TUNE+ on the RC) or
BACK/TUNE DOWN (BACK/TUNE- on the RC)
buttons by one press at a time and adjust the
frequency you wish to receive.
• Adjust the level and quality of sound with
VOLUME regulator.
• To turn off the radio, set FUNCTION
switch to TAPE (OFF) position.
Radio station memory
50 broadcast stations 20 AM and 30 FM can
be stored to the preset memory locations.
• During tuner (radio) mode find a desired
station.
• Press MEM.SET/SKIP+10/FOLDER button
to activate memory setting mode (the “mem”
symbol will flash repeatedly in the display).
• Press NEXT/TUNE UP (NEXT/TUNE+ on
the RC) or BACK/TUNE DOWN (BACK/TUNE-
on the RC) buttons to choose the desired
memory location (small number displayed on
right side of screen).
• Press MEM.SET/SKIP+10/FOLDER button
again, then the desired stations will be stored
in the selected memory locations.
• Repeat above steps for storing various
stations to other memory locations.
Listening to radio stations from
memory
• Set FUNCTION switch to RADIO position.
• Select your desired broadcasting band by
pressing PLAY/PAUSE/BAND (AM/FM) button.
• Press REPEAT/PROGRAM/MEMORY
button.
• Press NEXT/TUNE UP (NEXT/TUNE+ on
the RC) or BACK/TUNE DOWN (BACK/TUNE-
on the RC) buttons to choose the desired
memory location (small number displayed on
right side of screen).
Antenna
• For FM reception, adjust the telescopic
antenna appropriately to obtain the best
reception on the band selected.
• The AM signal is picked up through the
built-in ferrite antenna. The set should be
placed to a position for the best reception.
CD/MP3 operation
Insertion and removal of discs
• Place a disc into the compartment with the
label-side (printed side of disc) facing upwards.
Press down in the center part of disc until the
disc “locks” onto the center spindle.
• When the disc has been placed onto
the center spindle, gently lower the CD-door
downwards until it locks shut. The disc is now
ready to be played.
• Press STOP/CD/USB/SD/FM MODE button
(STOP/FM.MODE button on the RC) to stop the
disc spinning before opening the CD-door.
• To remove a disc, follow the same
procedure as described above, except to
remove the disc instead of inserting it into the
compartment, by placing one finger at the
middle of disc (center spindle) and the other at
the edge of the disc and gently pulling upwards.
Always hold a disc by its edges. Avoid
getting any fingerprints, smudges or dirt onto
the surface of a disc. In case this happens, use
a special CD-cleaning cloth or cleaning kit to
remove the dirt or smudges. Please make sure
to always fold down the handle before opening
the CD door.
General operation
• Set FUNCTION switch to CD (MP3)
position.
• Put a disc into the CD compartment and
close the CD door.
• The LCD display will show the total
number of tracks after a few second.
Play/pause mode
• Press PLAY/PAUSE/BAND button (BAND/
PLAY/PAUSE button on the RC) to start play,
the LCD display will show the first track and
PLAY icon.
Summary of Contents for H-1435
Page 15: ......
