Hyundai H-1435, Instruction Manual

Page: 5 / 15

5
Instruction manual
• Press PLAY/PAUSE/BAND button to
pause at any track when playing, PLAY icon on
the display flashes.
• To stop the disc, press STOP/CD/USB/
SD/FM MODE button (STOP/FM.MODE button
on the RC).
• If the disc contains folders with files, select
a folder by pressing MEM.SET/SKIP+10/
FOLDER button (SKIP+10/FOLDER button
on the RC). Also, press this button to skip 10
tracks forward.
Skip and search mode
• Press NEXT/TUNE UP button (NEXT/
TUNE+ button on the RC) once to skip to the
next track.
• Press BACK/TUNE DOWN button (BACK/
TUNE+ button on the RC) once to skip back to
previous track.
• Press and hold NEXT/TUNE UP (NEXT/
TUNE+ on the RC) or BACK/TUNE DOWN
(BACK/TUNE- on the RC) buttons to start fast
backward or forward playback until you find the
passage to play from.
Repeat mode
• Press REPEAT/PROGRAM/MEMORY
button once for single track repeat playing.
• Press REPEAT/PROGRAM/MEMORY
button twice for all tracks repeat playing.
• To cancel repeat play, press REPEAT/
PROGRAM/MEMORY button once again.
Program mode
• Up to 60 tracks can be programmed for
disc play in any order or the same track can be
repeated up to 60 times. Before use, be sure
to press STOP/CD/USB/SD/FM MODE button
(STOP button on the RC) button.
• Press REPEAT/PROGRAM/MEMORY
button, the memory position number will show
on the display.
• Select a desired track by using NEXT/TUNE
UP (NEXT/TUNE+ on the RC) or BACK/TUNE
DOWN (BACK/TUNE- on the RC) buttons.
• Press REPEAT/PROGRAM/MEMORY
button to confirm.
• Repeat the two last steps as described
above to enter additional memories into the
program if necessary.
• When all the desired tracks have been
programmed, press PLAY/PAUSE/BAND
button (PLAY/PAUSE button on the RC) to play
the disc in the order you have programmed.
• To stop the CD, press STOP/CD/USB/SD/
FM MODE button (STOP/FM.MODE button on
the RC).
The program memory will be cleared
only when the CD compartment is opened or
turn off the CD or power supply.
• To turn off the CD player set FUNCTION
switch to TAPE (OFF) position.
Good quality sound is guaranteed only
when playing licensed discs.
Cassette playback
• Slide FUNCTION switch to TAPE (OFF)
position.
• Press button to open the cassette
compartment.
• Insert a cassette and push the cassette
door to close the cassette compartment. The
full tape reel should be on the right side.
• Press button to start playback.
• Press button to pause playback. If you
press it again the playback will continue.
• Press button to stop playback, press
the button again to open the cassette door so
you can take out the tape.
• When the tape plays to the end, playback
will stop automatically.
• Fast forward and rewind: You can run
forward and rewind the tape. Stop playback.
Use
button for fast forward and button
for fast backward playback. When you have
reached the desired tape point, press
button to stop the process.
Never use fast forward or rewind
operations during playback. This may cause
damage to the tape.