2
3
Instruction manual
Instruction manual
Stereo headphone connection
• For private listening, insert 3.5 mm
headphone into the stereo headphone jack (on
the back side of the unit).
• Adjust volume control to the appropriate
level as desired by turning VOLUME regulator.
• When the stereo headphone jack is
plugged, speakers will disconnect automatically.
Radio operation
• Set function switch to Radio position.
• Set BAND switch to AM or FM position.
• Rotate TUNING regulator to receive the
desired station frequency.
• To receive FM-signal in stereo mode, set
BAND switch to FM ST position. The FM-
stereo indicator will light.
• Adjust the level of sound with VOLUME
regulator.
• To turn off the radio, set FUNCTION
switch to TAPE (OFF) position.
Antenna
• For FM reception, adjust the telescopic
antenna appropriately to obtain the best
reception on the band selected.
• The AM signal is picked up through the
built-in ferrite antenna. The set should be
placed to a position for the best reception.
CD/MP3 operation
Insertion and removal of discs
• Place a disc into the compartment with the
label-side (printed side of disc) facing upwards.
Press down in the center part of disc until the
disc “locks” onto the center spindle.
• When the disc has been placed onto
the center spindle, gently lower the CD-door
downwards until it locks shut. The disc is now
ready to be played.
• Press STOP button to stop the disc
Important safeguards
•
Attention:
The owner’s manual contains
important operating and maintenance
instructions. For your safety, it is necessary to
refer to the manual.
•
Dangerous voltage:
Uninsulated
dangerous voltage that may be of sufficient
magnitude to constitute a risk of electrical
shock to persons is present within this product
enclosure.
•
Caution:
To reduce the risk of electric
shock, do not dismantle the body. Prefer
servicing to qualified service personnel. Do not
use the unit in places where it can be exposed
to water, moisture and dust. Make sure that
pins or other foreign objects do not get inside
the unit; they may cause malfunctions, or
create safety hazards such as electrical shock.
Power supply
Battery operation
• Open the battery compartment cover.
• Insert 6 batteries (UM-2/LR14 type).
Please observe correct battery polarities or the
set will not work.
• Close the battery compartment cover.
AC operation
• Before the first connecting of the appliance
check that voltage indicated on the rating label
corresponds the mains voltage in your home.
• Insert the plug into power supply.
Caution:
• When the set is only used with AC or is
not used for 2 weeks or more, please remove
the batteries, to avoid damage to the set from
leakage of batteries.
• Always switch off the unit when not in use.
• Always unplug the appliance from power
supply, when not in use long time.
