2
3
Instruction manual
Instruction manual
• To connect an external audio device (eg.
MP3 player), please use a standard stereo
cable (not included) with 3.5 mm to 3.5 mm
plugs to connect the headphone out or audio
line-out of the external device to the AUX in
input socket of this unit.
• Slide FUNCTION switch to AM position.
• Turn on the external device.
CD/MP3/USB operation
Insertion and removal of discs
• When opening the CD-door, always
ensure the disc is not in motion (not spinning).
Always press STOP button to stop the disc
spinning first.
• Place a CD into the compartment with the
label-side (printed side of disc) facing upwards.
Press down in the center part of disc until the
disc locks onto the center spindle.
• When the CD has been placed onto the
center spindle, gently lower the CD-door
downwards until it locks shut.
• The CD is now ready to be played.
• To remove a disc, follow the same
procedure as described above, except to
remove the CD instead of inserting it into the
compartment, by placing one finger at the
middle of disc (center spindle) and the other at
the edge of the disc and gently pulling upwards.
Always hold a CD by its edges. Avoid
getting any finger prints, smudges or dirt onto
the surface of a disc. In case this happens, use
a special CD-cleaning cloth or cleaning kit to
remove the dirt or smudges. Please make sure
to always fold down the handle before opening
the CD door.
General operation
• Insert a CD as described.
• Slide FUNCTION switch to “CD/MP3/USB”
position.
• The CD will spin momentarily and then the
display will show the total number of t racks
(songs) of the disc.
Power supply
Battery operation
• Open the battery compartment cover.
• Insert 6 batteries (UM-2/LR14). Please
observe correct battery polarities or the set will
not work.
• Close the battery compartment cover.
AC operation
• Before the first connecting of the appliance
check that voltage indicated on the rating label
corresponds the mains voltage in your home.
• Insert the plug into power supply.
Caution:
• When the set is only used with AC or is
not used for 2 weeks or more, please remove
the batteries, to avoid damage to the set from
leakage of batteries.
• Always switch off the unit when not in use.
• Always unplug the appliance from power
supply, when not in use long time.
Radio operation
• Set FUNCTION switch to the desired band
(AM or FM).
• Rotate TUNING knob to tune-in the
desired station.
• Adjust the telescopic antenna (for FM) and
position of the set (for AM) to obtain the best
reception.
• Rotate VOLUME knob to adjust the
volume the desired level.
• To turn off the radio, slide FUNCTION
switch to “OFF”.
AUX Line-in connection
You can connect the audio output of an
external device (such as a CD-player) to
this unit, to listen to the sound of that device
through the amplifier of this unit.
