Hyundai Excellence H-CDM4007, Instruction Manual

Page: 22 / 76

22
Note: If a disc is left in the ejected position for 11 seconds, the disc is automatically reloaded (Auto reload). If
you force a disc into before auto reloading, this can damage disc.
Inserting the SD/ MMC card and USB device
Insert the SD/MMC card or USB device into SD/MMC compartment or USB socket respectively. Then the
playing mode will be changed into SD/MMC or USB mode automatically.
The first card/ USB device track playback will start.
Note: When SD/MMC card and USB device are both inserted into their compartment or socket, the playing
mode will be changed into the mode of the later one.
You can select the source using SOURCE button on the RC or MODE button on the panel.
Playing/ pausing
To ensure good system performance, wait until the unit finishes reading the disc information before proceeding.
After inserting the disc playback will start automatically. Or press the BND / PLAY/PAUSE on the panel or
press PLAY on the RC to start playback. Press the BND / PLAY/PAUSE on the panel to go into pause mode.
In pause mode press it again or press PLAY on the RC to resume the playback.
Stop playback
During playback press the STOP button on the RC to stop playback. Press PLAY button to start playback for
the place where it was stopped. Press STOP again to finally stop playback.
Playing the previous/ next track
During playback press the button to start next track/chapter/title playback.
Press the button to move back to the beginning of the current track. Press it twice to move to the beginning of
the previous track.