![background image](http://html1.mh-extra.com/html/hyundai/dynamic-auto-350m/dynamic-auto-350m_operation-manual_2197745007.webp)
VER 2. 0
- 6 -
DANGER
CYLINDERS can explode if damaged.
Shielding gas cylinders contain gas under high pressure. If damaged, a cylinder can
explode. Since gas cylinders are normally part of the welding process, be sure to
treat them carefully.
•
Protect compressed gas cylinders from excessive heat, mechanical shocks, slag, open flames,
sparks, and arcs.
•
Install cylinders in an upright position by securing to a stationary support or cylinder rack to prevent
falling or tipping.
•
Keep cylinders away from any welding or other electrical circuits.
•
Never drape a welding torch over a gas cylinder.
•
Never allow a welding electrode to touch any cylinder.
•
Never weld on a pressurized cylinder-explosion will result.
•
Use only correct shielding gas cylinders, regulators, hoses, and fittings designed for the specific
application; maintain them and associated parts in good condition.
•
Turn face away from valve outlet when opening cylinder valve.
•
Keep protective cap in place over valve except when cylinder is in use or connected for use.
•
Read and follow instructions on compressed gas cylinders, associated equipment.
WARNING
ARC RAYS can burn eyes and skin.
Arc rays from the welding process produce intense visible and invisible (ultraviolet
and infrared) rays that can burn eyes and skin. Sparks fly off from the weld.
•
Wear a welding helmet fitted with a proper shade of filter to protect your face and
eyes when welding or watching.
•
Safety gloves must be worn.
•
Face protection must be worn.
•
Use protective screens or barriers to protect others from flash and glare; warn
others not to watch the arc.
•
Wear protective clothing made from durable, flame-resistant material (leather and
wool) and foot protection.
Summary of Contents for Dynamic auto 350M
