VER 2. 0
- 14 -
3-3-3. Transporting Methods
WARNING
This unit is equipped with two eyelets for carrying purposes.
•
Do not touch live electrical parts.
•
Disconnect input power conductors from de-energized supply line before moving
welding power source.
•
Falling equipment can cause serious personal injury and equipment damage.
•
Move unit with hand cart of similar device of adequate capacity.
•
If using a fork lift vehicle, place and secure unit on a proper skid before
transporting.
Be sure unit is lifted and transported safely and securely.
3-4. Weld Output Receptacles And Selecting Cable Sizes
▲
ARC WELDING can cause Electromagnetic Interference.
To reduce possible interference, keep weld cables as short as possible, close
together, and down low, such as on the floor. Be sure this welding machine is
installed and grounded according to this manual. If interference still occurs, the
user must take extra measures such as moving the welding machine, using
shielded cables, using line filters, or shielding the work area.
Summary of Contents for Dynamic auto 350M
