![background image](http://html1.mh-extra.com/html/hyundai/dtb-656-dw7/dtb-656-dw7_instruction-manual_2196235067.webp)
EN
EN - 67
wARNINg!
Never use a spray cleaner to clean the door panel for it could damage the door lock
and electrical components. It is not allowed to use the abrasive agent or some paper
towel becauseof the risk of scratching or leaving spots on the stainless steel surface.
hOw TO KEEP yOUR DIShwAShER IN ShAPE
After Every wash
After every wash, turn of f the water supply to the appliance and leave the door slightly a jar so
that moisture and odors are not trapped inside.
Remove the Plug
Before cleaning or performing maintenance, always remove the plug from the socket.
Do not run risks.
No Solvents or Abrasive Cleaning
To clean the exterior and rubber parts of the dishwasher, do not use solvents or abrasive
cleaning products. Rather, use only a cloth and warm soapy water. To remove spots or stains
from the surface of the interior, use a cloth dampened with water and a little white vinegar,
or a cleaning product made specifically for di shwashers.
when you go on holiday
When you go on holiday, it is recommened that you run a wash cycle with the dishwasher empty
and then remove the plug f rom the socket, turn off the water supply and leave the door
of the appliance slightly ajar. This will help the seals last longer and prevent odors from forming
within the appliance.
Moving the Appliance
If the appliance must be moved, try to keep it in the vertical position.If absolutely necessary,
it can be positioned on its back.
Seals
One of the factors that cause odors to form in the dishwasher is food that remains trapped
in the seals. Periodic cleaning w ith a damp sponge will prevent this from occurring.
8. INSTALLATION INSTRUCTION
About Electricity Connecting
CAUTION for personal safety:
DO NOT USE AN EXTENSION CORD OR AN ADAPTER PLUG WITH THIS APPLIANCE.
DO NOT, UNDER ANY CIRCUMSTANCES, CUT OR REMOVE THE THIRD GROUNDING
PRONG FROM THE POWER CORD.
Electrical Requirements
Please see the rating label to know the rating voltage and connect the dishwasher
to appropriate power supply, which has a required fuse 10 amp. Time delay fuse
or circuit breaker recommended and provide separate circuit serving only this appliance.
Insure propar ground
Electrical Connection
After making sure that the voltage and the frequency values for the current in the home
correspond to those on the rating plate and that the electrical system is sized for the max.
voltage on the rating plate, insert the plug into an electrical socket which is earthed properly.
If the electrical socket to which the appl iance must be connected is not appropriate for the plug,
replace the socket,rather than using a adaptors or the like as they could cause overheating
and burns.