![background image](http://html1.mh-extra.com/html/hyundai/dtb-656-dw7/dtb-656-dw7_instruction-manual_2196235057.webp)
EN
EN - 57
when to Refill the Rinse Aid Dispenser
If there is no rinse-aid w arning light in the control panel, you can judge t he amount of rinse-aid
by the color of the optical level indicator „D“ located next to the cap. When the rinse-aid
container is full, the whole indicator will be dark .As t he rinse-aid diminishes, the size
of the dark dot decreases. You should never let the rinse aid get below 1/4 full.
As the rinse aid diminishes, the size of the black dot on the rinse aid level indicator changes,
as illustrated below.
Full
3/4 full
1/2 full
1/4 full - Should refill to eliminate spotting
Empty
RINSE AID DISPENSER
To open the dispenser, turn the cap to the „open“ (left) arrow and lift it out.
Pour the rinse aid into the dispenser, being careful not to overfill.
Replace the cap by inserting it aligned with „open“ arrow and turning it to the closed (right)
arrow.
The rinse aid is released during the final rinse to prevent water from forming droplets on your
dishes that can leave spots and streaks. It also improves drying by allowing water to sheet off
the dishes.
Your dishwashers are designed to use liquid rinse aids. The rinse aid dispenser is located inside
the door next to the detergent dispenser. To fill the dispenser, open the cap and pour the rinse
aid into the dispenser until the level indicator turns completely black. The volume of the rinse aid
container is about 110 ml. Be careful not to overfill the dispenser, because this could cause over
sudsing. Wipe away any spills with a damp cloth. Don‘t forget to replace the cap before
you close dishwasher door.
1)
)
3)