Hyundai DIGITAL NAVIGATION SYSTEM, User Manual

Page: 26 / 207

2-10
AUDIO SYSTEM
PART 2 AudIO SYSTEM
Operating the CdP
Precautions upon handling discs
●
After using a disc, keep it in the original case
to prevent it from becoming scratched,
which may cause the CD to make popping
sounds.
●
Do not use heart-shaped discs, octagon-
shaped discs, or any other abnormally
shaped disc. Such discs may be the cause of
malfunctions.
●
Do not clean discs with chemical solutions
such as record sprays, antistatic sprays, anti-
static liquids, benzene, or thinners. Such
materials may cause the surface of DISC to
be unrecoverable.
●
Do not expose the disc to direct sunlight for
prolonged periods of time. Such exposure
may lead to disc deformation.
●
Dust, scratch, and other substances may
cause popping sound while playing as well
as sound deterioration.
●
Never place paper on either side of the disc
or write on disc surfaces. Sharp writing
utensils and inks used in felt-tip pens may
cause damage to disc surfaces
●
Clean fingerprints and dust off the signal
surface (coated side) of the disc with a soft
cloth.
Only soft cloths should be used as there are
no grooves for dust to get in as is the case
with LPs.
●
Copy-protected CDs such as S-type CDs
may not function in the device.
●
DATA CDs are not supported by the device.
(However, such discs may operate abnor-
mally.)
●
For safe and efficient operation
●
Do not disassemble the CDP for repair pur-
poses. Contact your place of purchase in the
case of malfunction. (Complete service
assistance will not be provided if the user
disassembles the device.)
●
Do not use water to clean the device.
Exposure to water may cause damage to
the device.
●
Be cautious not to introduce foreign sub-
stances into the disc insert slot.
Foreign substances may cause damage to the
interior of the device.
●
The device may fail to operate properly in
extremely hot or cold temperatures.
Discontinue the use of the device unless
normal temperature is maintained.
( The operational temperature range is:
-10
℃
~ 65
℃
).
●
Steam can be condensed on the fiberoptic
lens due to rain, wet conditions, or upon
operating the heating system.
●
Skipping may occur to the audio when driv-
ing on bumpy roads for prolonged periods
of time or upon severe shock to the vehicle.
●
Do not use chemical solvent to clean the
device. Such solvents may cause damage to
the surfaces of the device.
Always use a clean and dry cloth.
About CdP