Hyundai DIGITAL NAVIGATION SYSTEM, User Manual

Page: 20 / 207

2-4
AUDIO SYSTEM
PART 2 AudIO SYSTEM
(b) Selecting a Broadcast frequency
through SEEK
Press the
∧
S
EEK
,
TRACK
∨
keys on the control
panel for less than 0.8 second.
Once the SEEK function is operating (SEEK
indicator blinking), the next or previous
broadcast frequency with superior reception
will be searched automatically.
INFORMATION
●
Press the
∧
S
EEK
,
TRACK
∨
keys on the con-
trol panel or steering wheel remote control-
ler for more than 0.8 second to quickly
move to the nearest desired frequency.
Once the button is released, the next fre-
quency with superior reception will be
searched automatically.
●
If the SEEK function is operating, pressing
the
∧
S
EEK
,
TRACK
∨
keys on the control
panel again will terminate SEEK operation
and select the current frequency.
Voice Command
1. Press the key on the steering wheel
remote controller.
2. After the beep sound, say a command.
"Seek Up"
"Seek Down"
(c) Selecting a broadcast frequency
through manual search
Turn the
TUNE
knob on the control panel in
clockwise or counter-clockwise direction.
Each click on the
TUNE knob will increase or
decrease the frequency by 1 step (FM: 0.2
MHz, AM: 10 kHz).
Storing FM/AM preset
There are 2 ways to store preset frequencies -
(a) storing manually and (b) auto store.
(a) Storing manually
1. Select the desired frequency.
[Selecting FM/AM broadcast frequency],
page 2-3.
Press the preset button to store for over 0.8
second. The frequency will become stored
along with a beep sound.
INFORMATION
Six preset frequencies each for FM1/ FM2/AM
modes can be stored using the above instruc-
tions.
(b) Auto Store
After selecting the desired band, press the
Auto preset button. The 6 frequencies with
the most superior reception will be stored as
preset buttons in corresponding order.
INFORMATION
If the Auto preset button is pressed again
while operating Auto Store, then the Auto
Store operation will be terminated and the
previously played frequency will be restored.
Voice Command
1. Press the key on the steering wheel
remote controller.
2. After the beep sound, say a command.
"Auto preset"