Hyundai Coupe Tiburon 2005, Owner'S Manual

Page: 468 / 478

8
CONSUMER INFORMATION
6
!
SI060B1-E
TYRE REPLACEMENT
Tyres must be replaced when the
wear indicators appear as a solid bar
across the tyre tread. At this point,
the remaining tread depth will be ap-
proximately 1.6 mm. In addition to
this, the tyre must be replaced if any
portion of the tread has become bald
or if there are any lumps, bulges or
deep cuts in the sidewalls or tread.
Replacement tyres must be of the
recommended size and rating and
should be of the same manufacture
and tread pattern on each axle.
HGK5015
0.06 in. (1.6 mm )
Wear indicator
SI060A1-E
TYRE BALANCING
Incorrect tyre balance will cause steer-
ing vibration and uneven tyre wear.
The vehicle tyres are balanced during
production but may need further bal-
ancing throughout the life of the tyres.
It is recommended that the tyres be
balanced on the car for best results
and that the tyres are balanced when-
ever they have been removed from
the wheel for repair.
SI060D1-E
WHEEL REPLACEMENT
The original wheels may only be re-
placed with Hyundai Approved
Wheels.
WARNING:
Driving on worn or defective tyres
is dangerous. Worn tyres may
cause loss of steering control and
a serious deterioration of braking
efficiency. Defective tyres may
cause vibration and loss of con-
trol through blow outs.
Tyres of different size, construction
or tread pattern should not be inter-
mixed on the same axle. Radial and
cross ply tyres should not be used on
the same vehicle.
The use of tyres and wheels of non
approved sizes can be dangerous.
gkfluk-8.p65 11/21/2005, 2:59 PM 6