Hyundai Coupe Tiburon 2005, Owner'S Manual

Page: 131 / 478

1
FEATURES OF YOUR HYUNDAI
117
4.DISC Select Button
To select the CD you want, push "DISC
" or "DISC " to change the disc
number.
5. RANDOM Button
With random, you can listen to the
tracks in random, rather than sequen-
tial order, on all of the discs or on one
disc.
To use random, do the following:
o Press and release the RDM button to
play the tracks on all of the discs or
on one disc that are loaded, in ran-
dom order. RDM will appear in the
display. Press RDM to turn if off.
6. REPEAT Button
o To repeat the track you are currently
listening to, press the RPT button.
To cancel, press again.
o If you do not release RPT operation
after all the tracks are played back,
the unit will play back again from the
first track.
7. TRACK UP/DOWN
o The desired track on the disc cur-
rently being played can be selected
using the track number.
o Press once to skip forward to the
beginning of the next track.
o Press once to skip back to the
beginning of the track.
8. FF/REW Button
While the disc is playing, if you hold
down the FF button continuously, the
selected track is advanced. Holding
down the REW button continuously
moves the selected track back.
9. SCAN Button
o Press the SCAN button to playback
the first 10 seconds of each track.
o Press the SCAN button again within
10 sec. when you have reached the
desired track.
CLASSIC
→
JAZZ
→
ROCK
→
DEFEAT
10. EQ Button
Press the EQ button to select the CLAS-
SIC, JAZZ, ROCK and DEFEAT MODE
for the desired tone quality. Each press
of the button changes the display as
follows;
NOTE:
o To assure proper operation of the
unit, keep the vehicle interior tem-
perature within a normal range by
using the vehicle's air condition-
ing or heating system.
o When replacing the fuse, replace
it with a fuse having the correct
capacity.
o The preset station frequencies are
all erased when the car battery is
disconnected. Therefore, all data
will have to be set again if this
should occur.
o Do not add any oil to the rotating
parts. Keep magnets, screwdriv-
ers and other metallic objects away
from the tape mechanism and head.