Hyundai Coupe Tiburon 2005, Owner'S Manual

Page: 119 / 478

1
FEATURES OF YOUR HYUNDAI
105
B260D02O-AAT
1. Playing CD
o Insert the CD with the label facing
upward.
o Insert the CD to start CD playback,
during radio operation.
o When a disc is in the CD deck, if you
press the play button, the CD player
will begin playing even if the radio is
being used.
o The CD player can be used when the
ignition switch is in either the "ON" or
"ACC" position.
2. FF/REW ( / )
If you want to fast forward or reverse
through the compact disc track, push
and hold the FF ( ) or REW ( )
button.
When you release the button, the com-
pact disc player will resume playing.
3. TRACK UP/DOWN
o The desired track on the disc cur-
rently being played can be selected
using the track number.
o Press once to skip forward to the
beginning of the next track. Press
once to skip back to the begin-
ning of the track.
4. SCAN Button
o Press the SCAN button to playback
the first 10 seconds of each track.
o Press the SCAN button again within
10 sec. when you have reached the
desired track.
5. REPEAT Button
o To repeat the track you are currently
listening to, press the RPT button.
To cancel , press again.
o If you do not release RPT operation
when the track ends, it will automati-
cally be replayed.
This process will be continued until
you push the button again.
6. EJECT Button
When the EJECT button is pressed
with a CD loaded, the CD will eject.
NOTE:
o If the CD does not operate prop-
erly or if the ER2 fault code is
displayed, use one of two meth-
ods to reset the CD deck function.
- Remove the audio fuse for 5 min-
utes. Then, reinstall the audio fuse.
- Diconnect the negative terminal of
the battery and wait 5 minutes.
Then reconnect the negative bat-
tery terminal.
o To assure proper operation of the
unit, keep the vehicle interior tem-
perature within a normal range by
using the vehicle's air condition-
ing or heating system.
o When replacing the fuse, replace
it with a fuse having the correct
capacity.
o The preset station frequencies are
all erased when the car battery is
disconnected. Therefore, all data
will have to be set again if this
should occur.