Hyundai Coupe Tiburon 2005, Owner'S Manual

Page: 229 / 478

6
DO-IT-YOURSELF MAINTENANCE
31
G290B01GK-GAT
Adjustment After Headlight As-
sembly Replacement
If the vehicle has had front body
repair and the headlight assembly
has been replaced, the headlight aim-
ing should be checked using an aim-
ing screen as shown in the illustra-
tion. Turn on the headlight switch.
1. Adjust headlights so that main axis
of light is parallel to center line of
the body and is aligned with point
"P" shown in the illustration.
2. Dotted lines in the illustration show
the center of headlights.
SPECIFICATION:
"H"
Horizontal center line of headlights
from ground:
Low Beam: 679mm (26.7 in.)
High Beam: 672mm (26.5 in.)
"W"
Distance between each headlight cen-
ter :
Low Beam: 1,202mm (47.3 in.)
High Beam: 966mm (38.0 in.)
"L"
Distance between the headlights and
the wall that the lights are tested
against : 3,000 mm (118 in.)
REPLACEMENT OF LIGHT
BULBS
!
G260A02A-AAT
Before attempting to replace a light
bulb, be sure the switch is turned to
the "OFF" position.
The next paragraph shows how to
reach the light bulbs so they may be
changed. Be sure to replace the
burned-out bulb with one of the same
number and wattage rating.
See page 6-39 for the wattage descrip-
tion.
CAUTION:
Keep the lamps out of contact with
petroleum products, such as oil,
gasoline, etc.
G290B01HR-1
H
Ground
line
30mm (1.18 in.)
L
Cut-off line
"P"
Horizontal line
H
W
Vertical line