3.3.2.
All other models.
3.3.2.1.
Clamp the handle to the main body by
using the lower clamps (2).
3.3.2.2.
Once this is done unfold the upper half
of the handle and lock into place using
clamps (1).
3.4.
Fitting recoil to handle.
3.4.1.
Unplug spark plug, pull back the OPC lever
3.4.2.
Slowly pull recoil until it reaches the recoil retaining loop on right hand handle.
3.5.
Height Adjustment.
3.5.1.
HYM40P model only.
3.5.1.1.
To adjust the cutting height on the
HYM40P model, the wheels can be removed
and adjusted manually to one of three
settings.
3.5.1.2.
Set each wheel to the same height to
ensure an even cut.
3.5.2.
All other models.
3.5.2.1.
Using adjustment lever pull outwards and select required height.
3.5.2.2.
Height is automatically adjusted to all wheels.
Page 11
Rev 4