![background image](http://html1.mh-extra.com/html/hyundai/bhym43p/bhym43p_user-manual_2196659015.webp)
4.1.
Recoil Starting ‘Push Type’ model (N.B. HYM40P does not have a throttle lever – it is a fixed speed
engine).
4.1.1.
Select correct cutting height.
4.1.2.
When starting from cold, turn throttle lever to position
and push the primer bulb
in fully 5 times.
4.1.3.
When starting warm engine, turn throttle lever to half speed position and push the primer
bulb in once fully.
4.1.4.
Pull the Operator Presence Control (OPC) lever back to the handle.
4.1.5.
Pull the recoil starter sharply, do not let go of recoil starter handle, release slowly and
repeat until engine starts.
4.1.6.
Once engine is running, push engine speed control fully forward.
4.1.7.
Pull drive lever towards main handle push machine forward to cut grass. (N.B Not fitted
on HYM40P & HYM43P).
4.2.
Recoil Starting ‘Self Propelled’ model.
4.2.1.
Select correct cutting height.
4.2.2.
When starting from cold, turn throttle choke lever to
position and push the primer
bulb in fully 5 times.
4.2.3.
When starting warm engine, turn throttle choke lever to half speed position and push the
primer bulb in once fully.
4.2.4.
Pull the Operator Presence Control (OPC) lever back to the handle.
4.2.5.
Pull the recoil starter sharply, do not let go of recoil starter handle, release slowly and
repeat until engine starts.
4.2.6.
Move drive lever towards main handle and machine will move forward to cut grass.
4.2.7.
N.B Releasing the OPC lever will stop the lawnmower.
4.3.
Electric start model HYM46SPE/HYM51SPE. (Note – there is no fuel primer bulb on this model).
4.3.1.
Charge the battery for 6 hours before use. Model HYM46SPE/HYM51SPE only.
4.3.2.
When starting from cold, turn throttle choke lever to
position.
4.3.3.
When starting warm engine, turn throttle choke lever to half speed position.
4.3.4.
Pull the Operator Presence Control (OPC) lever back to the handle.
4.3.5.
Turn key to start engine. Models HYM46SPE/HYM51SPE only.
4.3.6.
Once engine is running, select drive speed 1, 2 or 3.
4.3.7.
Standing behind the machine, move drive lever towards main handle and machine will move
forward to cut grass.
4.3.8.
N.B Releasing the OPC lever will stop the lawnmower.
Page 15
Rev 4