manualshive.com logo in svg

Hyundai ACCENT, Owner'S Manual, Page: 222 / 462

Share
Download
Hyundai ACCENT Owner'S Manual Download Page 222

4-18

Multimedia System

(Continued)

• Avoid use of USB

memory products that
can also be used as key
chains or mobile phone
accessories. Use of such
products may cause damage to the
USB jack.

• Connecting an MP3 device or phone

through various channels, such as
AUX/BT or Audio/USB mode may
result in pop noises or abnormal
operation.

• Use USB 2.0 devices for better com-

patibility. Maximum device size
supported is 32 GB.

Information -

Using an iPod

®

• iPod

®

is a registered trademark of

Apple Inc.

• In order to use the iPod

®

with your

vehicle’s audio system, you must use
a dedicated iPod

®

cable. (the cable

that is supplied when purchasing
iPod

®

/iPhone

®

products)

• If the iPod

®

is connected to the vehi-

cle while it is playing, a high pitch
sound could occur for approximate-
ly 1-2 seconds immediately after
connecting. If possible, connect the
iPod

®

to the vehicle with the iPod

®

stopped/paused.

• When the vehicle ignition is set to

ACC or ON, connecting the iPod

®

through the iPod

®

cable will charge

the iPod

®

through the car audio sys-

tem.

• When connecting with the iPod

®

cable, make sure to fully insert the
jack to prevent communication
interference.

(Continued)

(Continued)

• When the EQ features of an exter-

nal device, such as the iPod

®

, and

the audio system are both active, EQ
effects could overlap and cause
sound deterioration and distortion.
Whenever possible, turn off the EQ
feature within the external device
when it is connected to the audio
system.

• Noise may occur when an iPod

®

or

AUX device is connected. When
such devices are not being used, dis-
connect the device for storage.

• When the iPod

®

or AUX device

power is connected to the power
jack, playing the external device
may result in noise. In such cases,
disconnect the power connection
before use.

• Skipping or improper operation

may occur depending on the charac-
teristics of your iPod

®

/iPhone

®

device.

(Continued)

i

Summary of Contents for ACCENT















































































































































































































































































































































































































































































Reviews:

No comments