manualshive.com logo in svg

Hyundai ACCENT, Owner'S Manual, Page: 172 / 462

Share
Download
Hyundai ACCENT Owner'S Manual Download Page 172

3-94

Convenient features of your vehicle

D

DE

EF

FR

RO

OS

ST

TE

ER

R

• The sensor may not recognize

objects less than 40 cm (15 in)
from the sensor, or it may sense an
incorrect distance. Use caution.

• When the sensor is blocked with

snow, dirt, debris, or ice, the rear
parking assist system may be inop-
erative until the snow or ice melts,
or the debris is removed. Use a
soft cloth to wipe debris away from
the sensor.

• Do not push, scratch or strike the

sensor with any hard objects that
could damage the surface of the
sensor. Sensor damage could occur.

• Do not spray the sensors or its sur-

rounding area directly with a high
pressure washer. Doing so may
cause the sensors to fail to operate
normally.

To prevent damage to the conduc-
tors bonded to the inside surface
of the rear window, never use
sharp instruments or window
cleaners containing abrasives to
clean the window.

Information 

If you want to defrost and defog the
front windshield, refer to “Windshield
Defrosting and Defogging” in this
chapter.

Rear window defroster

The defroster heats the window to
remove frost, fog and thin ice from
the interior and exterior of the rear
window, while engine is running.

i

NOTICE

OHCR046301

OYC046301

■

Manual climate control system

■

Automatic climate control system

Your new vehicle warranty does
not cover any accidents or dam-
age to the vehicle or injuries to
its occupants related to a Rear
Parking Assist System. Always
drive safely and cautiously.

WARNING  

Summary of Contents for ACCENT















































































































































































































































































































































































































































































Reviews:

No comments