manualshive.com logo in svg

Hyundai 2013 Azera, Owner'S Manual, Page: 54 / 403

Share
Download
Hyundai 2013 Azera Owner'S Manual Download Page 54

3 39

Safety features of your vehicle

(1) Driver’s front air bag
(2) Passenger’s front air bag
(3) Side impact air bag*
(4) Curtain air bag*
(5) Driver’s knee air bag*
(6) Passenger’s front air bag ON/OFF

switch*

* : if equipped

AIR BAG - SUPPLEMENTAL RESTRAINT SYSTEM (SRS)

WARNING

• Even in vehicles with air bags,

you and your passengers must
always wear the safety belts pro-
vided in order to minimize the
risk and severity of injury in the
event of a collision or rollover.

• SRS and pre-tensioners contain

explosive chemicals.
If scraping a vehicle without
removing SRS and pre-tension-
ers from a vehicle, it may cause
fire. Before scraping a vehicle, we
recommend that you contact an
authorized HYUNDAI dealer.

• Keep the SRS parts and wirings

away from water or any liquid. If
the SRS components are inoper-
ative due to exposure to water or
liquids, it may cause fire or
severe injury.

OHG030036/OHG030066L

❈

The actual air bags in the vehicle may differ from the illustration.

Summary of Contents for 2013 Azera




















































































































































































































































































































































































































Reviews:

No comments