Hyundai 2013 Azera Owner'S Manual Download Page 218

Page: 218 / 403

Features of your vehicle

142

✽

NOTICE FOR USING THE
iPod

DEVICE

• Some iPod

models might not support

the communication protocol and the
files will not be played.
Supported iPod

models:

- iPod

Mini

- iPod

4th (Photo) ~ 6th (Classic) gen-

eration

- iPod

Nano 1st~4th generation

- iPod

Touch 1st~2nd generation

• The order of search or playback of

songs in the iPod

can be different

from the order searched in the audio
system.

• If the iPod

disabled due to its own

malfunction, reset the iPod

. (Reset:

Refer to iPod

manual)

• An iPod

may not operate normally

on low battery.

• Some iPod

devices, such as the

iPhone, can be connected through the

Bluetooth

Wireless Technology inter-

face. The device must have audio

Bluetooth

Wireless Technology capa-

bility (such as for stereo headphone

Bluetooth

Wireless Technology). The

device can play, but it will not be con-
trolled by the audio system.

CAUTION IN USING THE

iPod

DEVICE

• The Hyundai iPod

Power Cable is

needed in order to operate iPod

with the audio buttons on the
audio system. The USB cable pro-
vided by Apple may cause mal-
function and should not be used
for Hyundai vehicles.

❋

The Hyundai iPod

Power Cable

may be purchased through your
Hyundai Dealership.

• When connecting iPod

with the

iPod

Power Cable, insert the con-

nector to the multimedia socket
completely. If not inserted com-
pletely, communications between
iPod

and audio may be interrupt-

ed.

• When adjusting the sound effects of

the iPod

and the audio system, the

sound effects of both devices will
overlap and might reduce or distort
the quality of the sound.

• Deactivate (turn off) the equalizer

function of an iPod

when adjust-

ing the audio system’s volume,
and turn off the equalizer of the
audio system when using the
equalizer of an iPod

(Continued)

(Continued)
• When the iPod

cable is connect-

ed, the system can be switched to
AUX mode even without iPod

device and may cause noise.
Disconnect the iPod

cable when

you are not using the iPod

device.

• When not using iPod

with car

audio, detach the iPod

cable from

iPod. Otherwise, iPod

may remain

in accessory mode, and may not
work properly.

• Detachable USB/AUX

❋

When connecting
the iPod

, use the

USB/AUX terminals.

❋

When disconnect-
ing the iPod

, dis-

connect both the
USB/AUX terminal.

• All-in-one USB/AUX

❋

The iPod

exclusive

cable must be con-
nected to both the
USB/AUX terminals
for iPod

charging

and operations to
be supported.

Summary of Contents for 2013 Azera




















































































































































































































































































































































































































Search results

Summary of Contents for 2013 Azera

Reviews:

Brands by name

Popular brands

Hyundai 2013 Azera, Owner'S Manual

Search results

Summary of Contents for 2013 Azera

Reviews:

Brands by name

Popular brands